Byonics
Byonics
TinyTrak3
TinyTrak4
Cables
Micro-Trak
   •MT RTG
   •MT AIO
   •Micro-Fox
   •MT-1000
   •MT-2000
   •MTT4B
   •Micro-DTMF
   •Antenna
   •Micro-Volt 12
GPSs
PocketTracker
PocketFox
WXTrak
TinyPack
PicCon
TDOA
APO3
PICPAC
GST-1
Downloads
Links
Testimonials View Cart Contact
Home

Find us on Facebook
Micro-DTMF Touch Tone Receiver/Decoder

The Micro-DTMF Receiver/Decoder is an integrated programmable VHF receiver and DTMF touch tone decoder designed for remote control applications. The receiver may be set to any 2 meter amateur radio frequency (in 5 KHZ channel steps) via a terminal program and a 3/32" (2.5mm) three conductor plug programming cable. The decoder will decode all standard DTMF touchtones, and set the corresponding output high momentarily during detection of the tone. The Micro-DTMF operates on 7-15V and draws about 30 mA.

Add To Cart Micro-DTMF - $160
Includes built and tested circuit board, but no antenna or programming cable.

Add To Cart MT-AIO Programming Cable - $15
This programming cable (also used for the MT-AIO) will connect a Micro-DTMF to a computer serial port or USB-to-serial adapter for configuring. Cable is wired DB-9 female pin 5 to 3/32" stereo shield, pin 3 to ring, and pin 2 to tip.

Documentation: